utmp

Section: File Formats (5)
Updated: 2025-09-21
Index JM Home Page roff page
 

名前

utmp, wtmp - ログイン記録  

書式

#include <utmp.h>
 

説明

utmp ファイルを見ることで、現在誰がシステムを使っているかという情報 が得られる。ただすべてのプログラムが utmp ファイルを 更新しているわけではないので、実際にはそれ以上のユーザーが システムを使っている可能性がある。

警告: (愚かにも) 多くのシステムプログラムがその整合性に依存しているので、 utmp ファイルは "other" に分類されるユーザーに対して 書き込み可能にしてはならない。 ファイルの所有者とグループオーナー以外のユーザーに対して utmp ファイルを書き込み可能な状態にしておくと、 システムのログファイルを偽造されたり、システムファイルの 改ざんを受けるといったリスクを犯すことになる。

このファイルは utmp 構造体の繰り返しで構成される。 この構造体は <utmp.h> で以下のように定義されている (ここに記述してあるのは幾つかの大まかな定義のみで、 詳細は libc のバージョンにより変わることに注意が必要である)。

/* Values for ut_type field, below */

#define EMPTY         0 /* Record does not contain valid info
                           (formerly known as UT_UNKNOWN on Linux) */
#define RUN_LVL       1 /* Change in system run-level (see
                           init(1)) */
#define BOOT_TIME     2 /* Time of system boot (in ut_tv) */
#define NEW_TIME      3 /* Time after system clock change
                           (in ut_tv) */
#define OLD_TIME      4 /* Time before system clock change
                           (in ut_tv) */
#define INIT_PROCESS  5 /* Process spawned by init(1) */
#define LOGIN_PROCESS 6 /* Session leader process for user login */
#define USER_PROCESS  7 /* Normal process */
#define DEAD_PROCESS  8 /* Terminated process */
#define ACCOUNTING    9 /* Not implemented */

#define UT_LINESIZE      32
#define UT_NAMESIZE      32
#define UT_HOSTSIZE     256

struct exit_status {              /* Type for ut_exit, below */
    short e_termination;          /* Process termination status */
    short e_exit;                 /* Process exit status */
};

struct utmp {
    short   ut_type;              /* Type of record */
    pid_t   ut_pid;               /* PID of login process */
    char    ut_line[UT_LINESIZE]; /* Device name of tty - "/dev/" */
    char    ut_id[4];             /* Terminal name suffix,
                                     or inittab(5) ID */
    char    ut_user[UT_NAMESIZE]; /* Username */
    char    ut_host[UT_HOSTSIZE]; /* Hostname for remote login, or
                                     kernel version for run-level
                                     messages */
    struct  exit_status ut_exit;  /* Exit status of a process
                                     marked as DEAD_PROCESS; not
                                     used by Linux init(1) */
    /* The ut_session and ut_tv fields must be the same size when
       compiled 32- and 64-bit.  This allows data files and shared
       memory to be shared between 32- and 64-bit applications.  */
#if __WORDSIZE == 64 && defined __WORDSIZE_COMPAT32
    int32_t ut_session;           /* Session ID (getsid(2)),
                                     used for windowing */
    struct {
        int32_t tv_sec;           /* Seconds */
        int32_t tv_usec;          /* Microseconds */
    } ut_tv;                      /* Time entry was made */
#else
     long   ut_session;           /* Session ID */
     struct timeval ut_tv;        /* Time entry was made */
#endif

    int32_t ut_addr_v6[4];        /* Internet address of remote
                                     host; IPv4 address uses
                                     just ut_addr_v6[0] */
    char __unused[20];            /* Reserved for future use */
};

/* Backward compatibility hacks */
#define ut_name ut_user
#ifndef _NO_UT_TIME
#define ut_time ut_tv.tv_sec
#endif
#define ut_xtime ut_tv.tv_sec
#define ut_addr ut_addr_v6[0]

This structure gives the name of the special file associated with the user's terminal, the user's login name, and the time of login in the form of time(2). String fields are terminated by a null byte ('\0') if they are shorter than the size of the field.

最初のエントリーは init(1) コマンドが inittab(5) を処理することで作られる。 あるエントリーを処理する前に、 init(1) は ut_type を DEAD_PROCESS に初期化する。 レコードの ut_type が DEAD_PROCESS と RUN_LVL のいずれでもなく、 かつ PID が ut_pid であるプロセスがいない場合は、ut_user, ut_host, ut_time をヌルバイトでクリアして初期化を行う。 必要な ut_id を持つ空のレコードを見つけられなかった場合、 init(1) は新しいレコードを作る。inittab から ut_id を設定し、 ut_pid および ut_time を現在値に、 ut_type を INIT_PROCESS に設定する。

mingetty(8) (または agetty(8)) は pid でエントリーを特定し、 ut_type を LOGIN_PROCESS に変更し、 ut_time を更新し、ut_lineを設定した後、接続が確立されるのを待つ。 login(1) はユーザー認証が終了すると、 ut_type を USER_PROCESS に変更し、 ut_time を更新し、ut_host と ut_addrを設定する。 mingetty(8) (または agetty(8)) と login(1) により異なるが、 ut_pid の代わりに ut_line を使ってレコードの特定が行われることもある (ut_pid を使う方が望ましい) 。

init(1) はプロセスの終了を検出した場合、 ut_pid をキーとして utmp のエントリーを特定し、 ut_type を DEAD_PROCESS に設定し、 ut_user, ut_host, ut_time をヌルバイトでクリアする。

xterm(1) and other terminal emulators directly create a USER_PROCESS record and generate the ut_id by using the string that suffix part of the terminal name (the characters following /dev/[pt]ty). If they find a DEAD_PROCESS for this ID, they recycle it, otherwise they create a new entry. If they can, they will mark it as DEAD_PROCESS on exiting and it is advised that they null ut_line, ut_time, ut_user, and ut_host as well.

telnetd(8) は LOGIN_PROCESS を設定するだけでよく、 残りの処理は通常通り login(1) に任せればよい。 telnet のセッションが終了した後、前述のように telnetd(8) が utmp のエントリーを初期化する。

The wtmp file records all logins and logouts. Its format is exactly like utmp except that a null username indicates a logout on the associated terminal. Furthermore, the terminal name ~ with username shutdown or reboot indicates a system shutdown or reboot and the pair of terminal names |/} logs the old/new system time when date(1) changes it. wtmp is maintained by login(1), init(1), and some versions of getty(8) (e.g., mingetty(8) or agetty(8)). None of these programs creates the file, so if it is removed, record-keeping is turned off.  

ファイル

/var/run/utmp
/var/log/wtmp  

バージョン

POSIX.1 does not specify a utmp structure, but rather one named utmpx (as part of the XSI extension), with specifications for the fields ut_type, ut_pid, ut_line, ut_id, ut_user, and ut_tv. POSIX.1 does not specify the lengths of the ut_line and ut_user fields.

Linux では、 utmpx 構造体の定義は utmp 構造体と同じである。  

標準規格

Linux.  

歴史

Linux での utmp のエントリーは v7/BSD や System V のいずれにも準拠しておらず、 その両方が混在したものである。

v7/BSD ではより少しの項目しかない; もっとも重要なことは、ut_type が無いことである。 そのため v7/BSD 系のプログラムでは (たとえば) 死んだ状態のエントリーや ログイン状態のエントリーまで表示されてしまうことになった。 さらにセッション用のスロットを割り当てるための設定ファイルがない。 BSD に設定ファイルがあるのは ut_id がないからである。

Linux (System V 系)では、設定ファイルを必要とせず セッション用のスロットを割り当てるので、一旦設定 されてしまうとレコードの ut_id は決して変更されない。 ut_id をクリアすると競合状態におちいり、 utmp のエントリーを壊したり、潜在的なセキュリティホールになる可能性がある。 上述のフィールドをヌルバイトで埋めてクリアしておくのは、 System V での取り決めでは必要とはされていないが、 BSD での取り決めを前提としていて、かつ utmp を更新しない多くのプログラムが 動作するようにするためである。 Linux ではここまで記述してきたように、行内容の表示は BSD の慣例に従っている。

UT_UNKNOWN は Linux で作られたもののようである。 System V には ut_host も ut_addr_v6 も存在しない。  

注意

ファイルを削除することで utmp への記録を止められる 他の様々なシステムとは違い、Linux では utmp ファイルを必ずおいて おく必要がある。 who(1) コマンドが機能しないようにしたい場合には、 utmp ファイルの全ユーザーに対する読み取り許可を設定しないようにする。

ファイルのフォーマットはマシンに依存するので、ファイルが作られた マシンもしくは同一アーキテクチャーのマシン上でのみ処理することを推奨する。

Note that on biarch platforms, that is, systems which can run both 32-bit and 64-bit applications (x86-64, ppc64, s390x, etc.), ut_tv is the same size in 32-bit mode as in 64-bit mode. The same goes for ut_session and ut_time if they are present. This allows data files and shared memory to be shared between 32-bit and 64-bit applications. This is achieved by changing the type of ut_session to int32_t, and that of ut_tv to a struct with two int32_t fields tv_sec and tv_usec. Since ut_tv may not be the same as struct~timeval, then instead of the call:

gettimeofday((struct timeval *) &ut.ut_tv, NULL);

のような呼び出しをするのではなく、 以下のように各フィールドを設定する方法が推奨される:

struct utmp ut;
struct timeval tv;

gettimeofday(&tv, NULL);
ut.ut_tv.tv_sec = tv.tv_sec;
ut.ut_tv.tv_usec = tv.tv_usec;
 

関連項目

ac(1), date(1), init(1), last(1), login(1), logname(1), lslogins(1), users(1), utmpdump(1), who(1), getutent(3), getutmp(3), login(3), logout(3), logwtmp(3), updwtmp(3)


 

Index

名前
書式
説明
ファイル
バージョン
標準規格
歴史
注意
関連項目

This document was created by man2html, using the manual pages.